Configuration procedure
To configure the authentication trigger function on a port:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Set the username request timeout timer. | dot1x timer tx-period tx-period-value | Optional. The default is 30 seconds. |
3. Enter Layer 2 Ethernet interface view. | interface interface-type interface-number | N/A |
4. Enable an authentication trigger. | dot1x { multicast-trigger | unicast-trigger } | Required if you want to enable the unicast trigger. By default, the multicast trigger is enabled, and the unicast trigger is disabled. |