Specifying a RADIUS client
This task is to specify the IP address of a client to be managed by the RADIUS server and configure the authentication and encryption key. The RADIUS server processes only the RADIUS packets sent from the specified clients.
Follow these guidelines when you specify a RADIUS client:
The IP address of a RADIUS client specified on the RADIUS server must be consistent with the source IP address of outgoing RADIUS packets configured on the RADIUS client.
The authentication and encryption key configured on the RADIUS server must be consistent with that configured on the RADIUS client.
To specify a RADIUS client:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Specify a RADIUS client. | radius-server client-ip ip-address [ key [ ciper | simple ] string ] | No RADIUS client is specified by default. |