Cluster member management
You can manually add a candidate device to a cluster, or remove a member device from a cluster.
If a member device needs to be rebooted for software upgrade or configuration update, you can remotely reboot it through the management device.
Adding a member device
Step | Command |
|---|---|
1. Enter system view. | system-view |
2. Enter cluster view. | cluster |
3. Add a candidate device to the cluster. | add-member [ member-number ] mac-address mac-address [ password password ] |
Removing a member device
Step | Command |
|---|---|
1. Enter system view. | system-view |
2. Enter cluster view. | cluster |
3. Remove a member device from the cluster. | delete-member member-number [ to-black-list ] |
Rebooting a member device
Step | Command |
|---|---|
1. Enter system view. | system-view |
2. Enter cluster view. | cluster |
3. Reboot a specified member device. | reboot member { member-number | mac-address mac-address } [ eraseflash ] |