Configuring the CPE working mode
Configure the device to operate in one of the following CPE modes depending on its position in the network:
Gateway mode—Enables the ACS to manage the device and any CPE attached to the device. Use this mode if the device is the egress to the WAN and has lower-level CPEs.
Device mode—If no CPEs are attached to the device, configure the device to operate in device mode.
Disable CWMP before you change the CPE working mode.
To configure the working mode of the CPE:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter CWMP view. | cwmp | N/A |
3. Configure the working mode of the CPE. | cwmp device-type { device | gateway } | By default, the device operates in gateway mode. |