Configuring a PoE profile
If a PoE profile is applied, it cannot be deleted or modified before you cancel its application.
The poe max-power max-power and poe priority { critical | high | low } commands must be configured in only one way, that is, either at the CLI or by configuring PoE profile.
A PoE parameter on a PoE interface must be configured, modified and deleted in only one way. If a parameter configured in a way (for example, at the CLI) is then configured in the other way (for example, through PoE profile), the latter configuration fails and the original one is still effective. To make the latter configuration effective, you must cancel the original one first.
To configure a PoE profile:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create a PoE profile, and enter PoE profile view. | poe-profile profile-name [ index ] | N/A |
3. Enable PoE for the PoE interface. | poe enable | By default, this function is disabled. |
4. Configure the maximum power for the PoE interface. | poe max-power max-power | Optional. The default is 30000 milliwatts. |
5. Configure power supply priority for the PoE interface. | poe priority { critical | high | low } | Optional. By default, low is the power supply priority for the PoE interface. |