Configuring the refresh rate for NetStream version 9 templates
Version 9 is template-based and supports user-defined formats, so the NetStream-enabled device needs to resend a new template to the NetStream server for an update. If the version 9 format is changed on the NetStream-enabled device and is not updated on the NetStream server, the server cannot associate the received statistics with its proper fields.
To avoid this situation, configure the refresh frequency and the refresh interval for version 9 templates so that the NetStream server can refresh the templates on time. The refresh frequency and the refresh interval can be both configured, and the template is resent when either of the condition is reached.
To configure the refresh rate for NetStream version 9 templates:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Configure the refresh frequency for NetStream version 9 templates. | ip netstream export v9-template refresh-rate packet packets | Optional. By default, the version 9 templates are sent every 20 packets. |
3. Configure the refresh interval for NetStream version 9 templates. | ip netstream export v9-template refresh-rate time minutes | Optional. By default, the version 9 templates are sent every 30 minutes. |