Configuring the saving function of NQA history records
Perform this task to enable the system to save the history records of NQA operations. To view NQA history records, use the display nqa history command.
This task also configures the following parameters:
Lifetime of the history records—The records are removed when the lifetime is reached.
Maximum number of history records that can be saved for an NQA operation—If the maxim number is reached, the earliest history records are removed.
To configure the history records saving function:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Create an NQA operation and enter NQA operation view. | nqa entry admin-name operation-tag | By default, no NQA operation is created. |
3. Enter NQA operation type view. | type { dhcp | dlsw | dns | ftp | http | icmp-echo | snmp | tcp | udp-echo | udp-jitter | voice } | N/A |
4. Enable saving history records for the NQA operation. | history-record enable | By default, this feature is not enabled. |
5. Set the lifetime of history records. | history-record keep-time keep-time | Optional. The default setting is 120 minutes. |
6. Configure the maximum number of history records that can be saved. | history-record number number | Optional. The default setting is 50. |