Outputting system information to the console

1. Enter system view.

system-view

N/A

2. Enable the information center.

info-center enable

Optional.

Enabled by default.

3. Specify a name for a channel identified by its number.

info-center channel channel-number name channel-name

Optional.

See Table 2 for default channel names.

4. Configure an output channel for the console.

info-center console channel { channel-number | channel-name }

Optional.

By default, system information is output to the console through channel 0 (known as console).

5. Configure an output rule for the console.

info-center source { module-name | default } channel { channel-number | channel-name } [ debug { level severity | state state } * | log { level severity | state state } * | trap { level severity | state state } * ] *

Optional.

See "Default output rules of system information."

6. Configure the timestamp format.

info-center timestamp { debugging | log | trap } { boot | date | none }

Optional.

By default, the timestamp format for log, trap and debugging information is date.

7. Return to user view.

quit

N/A

8. Enable system information output to the console.

terminal monitor

Optional.

The default setting is enabled.

9. Enable the display of system information on the console.

• Enable the display of debug information on the console:terminal debugging

• Enable the display of log information on the console:terminal logging

• Enable the display of trap information on the console:terminal trapping

Optional.

By default, the console displays log and trap information, and discards debug information.