Contents
-
VXLAN overview -
Configuring basic VXLAN features -
-
VXLAN configuration task list -
Setting the VXLAN hardware resource mode -
Creating a VXLAN on a VSI -
Configuring a VXLAN tunnel -
Assigning VXLAN tunnels to a VXLAN -
Assigning customer frames to a VSI -
Managing MAC address entries -
-
Configuration restrictions and guidelines -
Configuring static MAC address entries -
Disabling local-MAC address learning -
Disabling remote-MAC address learning -
Setting the MAC learning priority of an Ethernet service instance -
Enabling local-MAC change logging -
Enabling software-based MAC learning on an interface
-
-
Configuring VXLAN over VXLAN -
Configuring a multicast-mode VXLAN -
Confining floods to the local site -
Setting the destination UDP port number of VXLAN packets -
Configuring VXLAN packet check -
Enabling ARP flood suppression -
Disabling remote ARP or ND learning for VXLANs -
Enabling VXLAN packet statistics -
Testing the reachability of a remote VM -
Displaying and maintaining VXLANs -
VXLAN configuration examples
-
-
Configuring VXLAN IP gateways -
-
Overview -
Configuration restrictions and guidelines -
Configuration prerequisites -
Configuring a centralized VXLAN IP gateway -
Configuring a centralized VXLAN IP gateway group -
Configuring a distributed VXLAN IP gateway -
Adding a static ARP entry -
Configuring a VSI interface -
Enabling packet statistics for a VSI interface -
Displaying and maintaining VXLAN IP gateway -
VXLAN IP gateway configuration examples
-
-
Configuring VXLAN-DCI -
-
Overview -
VXLAN-DCI configuration task list -
Configuring a VXLAN-DCI tunnel -
Assigning a VXLAN-DCI tunnel to a VXLAN -
Configuring a VSI interface -
Specifying a gateway interface for a VSI -
Enabling packet statistics for manually created VXLAN-DCI tunnels -
Displaying and maintaining VXLAN-DCI -
VXLAN-DCI configuration example
-
-
Configuring the VTEP as an OVSDB VTEP -
-
Overview -
Protocols and standards -
OVSDB VTEP configuration task list -
Configuration prerequisites -
Setting up an OVSDB connection to a controller -
Enabling the OVSDB server -
Enabling the OVSDB VTEP service -
Specifying a global source address for VXLAN tunnels -
Specifying a VTEP access port -
Enabling flood proxy on multicast VXLAN tunnels -
OVSDB VTEP configuration examples
-
-
Document conventions and icons -
Support and other resources