Specifying a VTEP access port

For the controller to manage a site-facing interface, you must specify the interface as a VTEP access port.

As a best practice, do not manually configure VXLAN settings on a VTEP access port.

To specify a VTEP access port:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	Enter Layer 2 Ethernet interface view:interface interface-type interface-number Enter Layer 2 aggregate interface view:interface bridge-aggregation interface-number	N/A
3. Specify the interface as a VTEP access port.	vtep access port	By default, an interface is not a VTEP access port.

prev	up	next
Specifying a global source address for VXLAN tunnels	home	Enabling flood proxy on multicast VXLAN tunnels