Enabling packet statistics for Ethernet service instances
Configuration restrictions and guidelines
For the statistics enable command to take effect on a static Ethernet service instance, you must configure a frame match criterion for the Ethernet service instance and map it to a VSI. When you modify the frame match criterion or VSI mapping, the packet statistics of the instance are cleared.
Enabling packet statistics for a static Ethernet service instance
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter interface view. |
| N/A |
3. Enter Ethernet service instance view. | service-instance instance-id | N/A |
4. Enable packet statistics for the Ethernet service instance. | statistics enable | By default, the packet statistics feature is disabled for all Ethernet service instances. For the statistics enable command to take effect, you must configure a frame match criterion for the Ethernet service instance and map it to a VSI. If you modify the frame match criterion or VSI mapping, packet statistics of the instance is cleared. |
5. (Optional.) Display packet statistics for Ethernet service instances. | display l2vpn service-instance [ interface interface-type interface-number [ service-instance instance-id ] ] [ verbose ] | This command is available in any view. |
Enabling packet statistics for Ethernet service instances of a VLAN
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter VLAN view. | vlan vlan-id | N/A |
3. Enable packet statistics for Ethernet service instances of the VLAN. | ac statistics enable | By default, packet statistics are disabled for Ethernet service instances of a VLAN. This feature enables packet statistics for the Ethernet service instances automatically created for VLAN-based VXLAN assignment. Before you enable this feature, you must use the vxlan vlan-based command to enable VLAN-based VXLAN assignment. |