Disabling local-MAC address learning

Configuration restrictions and guidelines

When MAC address learning is disabled for Ethernet service instances, you can only configure static local-MAC address entries by using the mac-address static command.

Configuration prerequisites

Before you enable MAC address learning for an Ethernet service instance, you must use the mac-learning enable command to enable MAC address learning for the associated VSI.

Configuration procedure

To disable MAC address learning for an Ethernet service instance:

Step	Command	Remarks
1. Enter system view.	system-view	N/A
2. Enter interface view.	Enter Layer 2 Ethernet interface view.interface interface-type interface-number Enter Layer 2 aggregate interface view.interface bridge-aggregation interface-number	N/A
3. Enter Ethernet service instance view.	service-instance instance-id	N/A
4. Disable MAC address learning for the Ethernet service instance.	learning mode disable	By default, MAC address learning is enabled for Ethernet service instances.

prev	up	next
Configuring static MAC address entries	home	Disabling remote-MAC address learning