ovsdb server pssl

Use ovsdb server pssl to enable the device to listen for OVSDB SSL connection requests.

Use undo ovsdb server pssl to restore the default.

Syntax

ovsdb server pssl [ port port-number ]

undo ovsdb server pssl

Default

The device does not listen for OVSDB SSL connection requests.

Views

System view

Predefined user roles

network-admin

Parameters

port port-number: Specifies a port to listen for OVSDB SSL connection requests. The value range for the port-number argument is 1 to 65535. If you do not specify a port, the device uses the port number 6640.

Usage guidelines

Before you use this command, you must specify a PKI domain for SSL.

You can specify only one port to listen for OVSDB SSL connection requests. If you execute this command multiple times, the most recent configuration takes effect.

For the specified port setting to take effect, you must execute the ovsdb server enable command to enable the OVSDB server. You must disable and then re-enable the OVSDB server if it has been enabled before OVSDB connections are configured, or OVSDB connection changes or SSL version changes are made.

Examples

# Enable the device to listen for OVSDB SSL connection requests on port 6640.

<Sysname> system-view
[Sysname] ovsdb server pssl

Related commands

ovsdb server bootstrap ca-certificate

ovsdb server enable

ovsdb server pki domain

ovsdb server ssl