if-match interface

Use if-match interface to match routes that have the specified output interfaces.

Use undo if-match interface to remove the specified output interface match criterion.

Syntax

if-match interface { interface-type interface-number }&<1-16>

undo if-match interface [ interface-type interface-number ]&<1-16>

Default

No output interface match criterion is configured.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

interface-type interface-number: Specifies an interface by its type and number.

&<1-16>: Indicates that you can specify a maximum of 16 interfaces.

Usage guidelines

BGP does not support criteria for matching the output interfaces of routes.

Examples

# Configure node 10 in permit mode for routing policy policy1 to permit routes with the output interface VLAN-interface 1.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match interface vlan-interface 1