if-match cost

Use if-match cost to match routes that have the specified cost.

Use undo if-match cost to restore the default.

Syntax

if-match cost cost-value

undo if-match cost

Default

No cost match criterion is configured.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

cost-value: Specifies a cost in the range of 0 to 4294967295.

Examples

# Configure node 10 in permit mode for routing policy policy1 to permit routes with a cost of 8.

<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match cost 8