apply ip-precedence

Use apply ip-precedence to set an IP precedence for matching routes.

Use undo apply ip-precedence to restore the default.

Syntax

apply ip-precedence { value | clear }

undo apply ip-precedence

Default

No IP precedence is set.

Views

Routing policy node view

Predefined user roles

network-admin

Parameters

value: Specifies an IP precedence in the range of 0 to 7.

clear: Clears the IP precedence of matching routes.

Examples

# Configure node 10 in permit mode for routing policy policy1 to set an IP precedence of 3 for BGP routes matching extended community list 100.

<Sysname> system-view
[Sysname] ip extcommunity-list 100 permit rt 100:100
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match extcommunity 100
[Sysname-route-policy-policy1-10] apply ip-precedence 3