display ipv6 policy-based-route

Use display ipv6 policy-based-route to display IPv6 PBR policy information.

Syntax

display ipv6 policy-based-route [ policy policy-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

policy policy-name: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. If you do not specify a policy, this command displays information for all IPv6 PBR policies.

Examples

# Display all IPv6 policy information.

<Sysname> display ipv6 policy-based-route
Policy name: aaa
  node 1 permit:
    if-match acl 2000
    apply next-hop 1000::1

Table 173: Command output

Field

Description

node 1 permit

The match mode of Node 1 is permit.

if-match acl

Compares IPv6 packets with IPv6 ACL.

apply next-hop

Specifies a next hop for permitted IPv6 packets.

Related commands

ipv6 policy-based-route (system view)