isis ipv6 primary-path-detect bfd

Use isis ipv6 primary-path-detect bfd to enable BFD for IPv6 IS-IS.

Use undo isis ipv6 primary-path-detect bfd to disable BFD for IPv6 IS-IS.

Syntax

isis ipv6 primary-path-detect bfd { ctrl | echo }

undo isis ipv6 primary-path-detect bfd

Default

BFD is disabled for IPv6 IS-IS.

Views

Interface view

Predefined user roles

network-admin

Parameters

ctrl: Enables BFD control packet mode.

echo: Enables BFD echo packet mode.

Usage guidelines

This command enables IPv6 IS-IS FRR or IPv6 IS-IS PIC to use BFD to detect primary link failures.

Examples

# Enable BFD control packet mode for IPv6 IS-IS FRR on VLAN-interface 10.

<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] address-family ipv6
[Sysname-isis-1-ipv6] fast-reroute lfa
[Sysname-isis-1-ipv6] quit
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis ipv6 primary-path-detect bfd ctrl

# Enable BFD echo packet mode for IPv6 IS-IS PIC on VLAN-interface 11.

<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] pic additional-path-always
[Sysname-isis-1] quit
[Sysname] bfd echo-source-ipv6 1::1
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] isis ipv6 primary-path-detect bfd echo