address-family ipv6

Use address-family ipv6 to create the IS-IS IPv6 address family and enter its view.

Use undo address-family ipv6 to remove the IS-IS IPv6 address family and all configurations in the view.

Syntax

address-family ipv6 [ unicast ]

undo address-family ipv6 [ unicast ]

Default

No IS-IS IPv6 address family exists.

Views

IS-IS view

Predefined user roles

network-admin

Parameters

unicast: Specifies the unicast address family (the default).

Usage guidelines

This command enables IPv6 for an IS-IS process.

Examples

# Create the IS-IS IPv6 address family and enter its view.

<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] address-family ipv6
[Sysname-isis-100-ipv6]