router-id
Use router-id to configure a router ID.
Use undo router-id to restore the default.
Syntax
router-id router-id
undo router-id
Default
No router ID is configured.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
router-id: Specifies a router ID in IPv4 address format.
Usage guidelines
The router ID is the unique identifier for the device to run OSPFv3 in the AS. An OSPFv3 process cannot run without a router ID.
You must specify a unique router ID for each OSPFv3 process in an AS and on a router.
Examples
# Configure the router ID 10.1.1.3 for OSPFv3 process 1.
<Sysname> system-view [Sysname] ospfv3 1 [Sysname-ospfv3-1] router-id 10.1.1.3
Related commands
ospfv3