display ospfv3 non-stop-routing

Use display ospfv3 non-stop-routing to display OSPFv3 NSR information.

Syntax

display ospfv3 [ process-id ] non-stop-routing

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this argument, the command displays OSPFv3 NSR information for all OSPFv3 processes.

Examples

# Display OSPFv3 NSR information.

<Sysname> display ospfv3 non-stop-routing

               OSPFv3 Process 1 with Router ID 3.3.3.3

 Nonstop Routing capability: Enabled
 Upgrade phase             : Normal

Table 153: Command output

Field	Description
Nonstop Routing capability	NSR status: enabled or disabled.
Upgrade phase	NSR phase: Normal—Normal status. Preparation—Upgrade preparation phase. Smooth—Upgrade phase. Precalculation—Route pre-calculation phase. Calculation—Route calculation phase. Redistribution—Route redistribution phase.

Field

Description

Nonstop Routing capability

NSR status: enabled or disabled.

Upgrade phase

NSR phase:

Normal—Normal status.
Preparation—Upgrade preparation phase.
Smooth—Upgrade phase.
Precalculation—Route pre-calculation phase.
Calculation—Route calculation phase.
Redistribution—Route redistribution phase.

prev	up	next
display ospfv3 nexthop	home	display ospfv3 peer