area

Use area to create an OSPFv3 area and enter OSPFv3 area view.

Use undo area to remove an OSPFv3 area.

Syntax

area area-id

undo area area-id

Default

No OSPFv3 areas exist.

Views

OSPFv3 view

Predefined user roles

network-admin

Parameters

area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to 4294967295 that is translated into the IPv4 address format.

Examples

# Create OSPFv3 Area 0 and enter its view.

<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0]