enable ipsec-profile
Use enable ipsec-profile to apply an IPsec profile to a RIPng process.
Use undo enable ipsec-profile to remove the IPsec profile from the RIPng process.
Syntax
enable ipsec-profile profile-name
undo enable ipsec-profile
Default
No IPsec profile is applied to a RIPng process.
Views
RIPng view
Predefined user roles
network-admin
Parameters
profile-name: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
To configure an IPsec profile, see IPsec in Security Configuration Guide.
Examples
# Apply IPsec profile profile001 to RIPng process 1.
<Sysname> system-view [Sysname] ripng 1 [Sysname-ripng-1] enable ipsec-profile profile001