display ripng neighbor

Use display ripng neighbor to display neighbor information for a RIPng process.

Syntax

display ripng process-id neighbor [ interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.

interface-type interface-number: Specifies an interface by its type and number. If you do not specify this argument, the command displays information about all neighbors for the RIPng process.

Examples

# Display neighbor information for RIPng process 1.

<Sysname> display ripng 1 neighbor
Neighbor Address: FE80::230:FF:FE00:0
     Interface  : Vlan-interface1
     Version    : RIPng version 1     Last update: 00h00m27s
     Bad packets: 0                   Bad routes : 0