display ip policy-based-route interface

Policy based routing information for interface XXXX(failed)

PBR configuration and statistics on the interface.

This field displays failed in brackets if none of the nodes in the policy has been successfully issued to the driver.

NOTE:

The failed status is available on a per-slot basis. To obtain this information, you must specify a slot number when you execute the command.

• For a global interface (for example, a VLAN interface), which might have member physical interfaces on multiple slots, specify a slot that contains its member interfaces.

• For a physical interface, specify its slot number.

node 0 deny(not support)

node 2 permit(no resource)

Match mode of the node, permit or deny.

If a node fails to be issued to the driver, the command displays the cause in brackets, which include:

• not support—The device does not support the match criteria configured on the node.

• no resource—No sufficient resources (for example, ACLs) are available for the node.

NOTE:

The cause is available only on a per-slot basis. To obtain this information, you must specify a slot number when you execute the command.

• For a global interface (for example, a VLAN interface), which might have member physical interfaces on multiple slots, specify a slot that contains its member interfaces.

• For a physical interface, specify its slot number.

if-match acl

Compares packets with the ACL.

apply next-hop

Specifies a next hop for permitted packets.

Matched: 0 (no statistics resource)

Number of successful matches on the node. If the device does not have sufficient resources to count matches, this field displays no statistics resource in brackets.

NOTE:

The statistics collection failure cause is available only on a per-slot basis. To obtain this information, you must specify a slot number when you execute the command.

• For a global interface (for example, a VLAN interface), which might have member physical interfaces on multiple slots, specify a slot that contains its member interfaces.

• For a physical interface, specify its slot number.

Total matched

Total number of successful matches on all nodes.