reflect between-clients
Use reflect between-clients to enable route reflection between clients.
Use undo reflect between-clients to disable route reflection between clients.
Syntax
reflect between-clients
undo reflect between-clients
Default
Route reflection between clients is enabled.
Views
BGP IPv4 unicast address family view
BGP-VPN IPv4 unicast address family view
BGP IPv6 unicast address family view
BGP LS address family view
BGP-VPN IPv6 unicast address family view
BGP IPv4 multicast address family view
BGP IPv6 multicast address family view
Predefined user roles
network-admin
Usage guidelines
When a route reflector is configured, and the clients of a route reflector are fully meshed, route reflection is unnecessary because it consumes more bandwidth resources. You can use the undo reflect between-clients command to disable route reflection instead of modifying network configuration or changing network topology.
After route reflection is disabled between clients, routes can still be reflected between a client and a non-client.
Examples
# In BGP IPv4 unicast address family view, disable route reflection between clients.
<Sysname> system-view [Sysname] bgp 100 [Sysname-bgp-default] address-family ipv4 unicast [Sysname-bgp-default-ipv4] undo reflect between-clients
Related commands
peer reflect-client
reflector cluster-id