log-peer-change

Use log-peer-change to enable the logging of neighbor state changes.

Use undo log-peer-change to disable the logging.

Syntax

log-peer-change

undo log-peer-change

Default

The logging of IS-IS neighbor state changes is enabled.

Views

IS-IS view

Predefined user roles

network-admin

Usage guidelines

This command enables sending logs about IS-IS neighbor state changes to the information center. For IS-IS neighbor state change logs to be sent correctly, you must also configure the information center parameters on the device. For more information about information center, see the network management and monitoring configuration guide for the device.

Examples

# Disable the logging of IS-IS neighbor state changes.

<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] undo log-peer-change