display ospf non-stop-routing status

Use display ospf non-stop-routing status to display OSPF NSR information.

Syntax

display ospf [ process-id ] non-stop-routing status

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. If you do not specify this argument, the command displays OSPF NSR information for all OSPF processes.

Examples

# Display OSPF NSR information.

<Sysname> display ospf non-stop-routing status

                   OSPF Process 1 with Router ID 192.168.33.12
                          Non Stop Routing information
                   -----------------------------------------
Non Stop Routing capability : Enabled
Upgrade phase : Normal

Table 42: Command output

Field	Description
Non Stop Routing capability	NSR status: enabled or disabled.
Upgrade phase	Upgrade phase: Prepare—Upgrade preparation phase. Restore Smooth—Upgrade phase. Preroute—Route pre-calculation phase. Calculating—Route calculation phase. Redisting—Route redistribution phase. Original and age—LSA generation and aging phase. Normal—Normal status.

Field

Description

Non Stop Routing capability

NSR status: enabled or disabled.

Upgrade phase

Upgrade phase:

Prepare—Upgrade preparation phase.
Restore Smooth—Upgrade phase.
Preroute—Route pre-calculation phase.
Calculating—Route calculation phase.
Redisting—Route redistribution phase.
Original and age—LSA generation and aging phase.
Normal—Normal status.

prev	up	next
display ospf nexthop	home	display ospf peer