area (OSPF view)

Use area to create an OSPF area and enter OSPF area view.

Use undo area to remove an OSPF area.

Syntax

area area-id

undo area area-id

Default

No OSPF areas exist.

Views

OSPF view

Predefined user roles

network-admin

Parameters

area-id: Specifies an area by its ID, an IP address or a decimal integer in the range of 0 to 4294967295 that is translated into the IP address format.

Examples

# Create Area 0 and enter Area 0 view.

<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0]