rip summary-address

Use rip summary-address to configure a summary route on an interface.

Use undo rip summary-address to remove a summary route on an interface.

Syntax

rip summary-address ip-address { mask-length | mask }

undo rip summary-address ip-address { mask-length | mask }

Default

No summary route is configured on an interface.

Views

Interface view

Predefined user roles

network-admin

Parameters

ip-address: Specifies the destination IP address of the summary route.

mask-length: Specifies the subnet mask length of the summary route, in the range of 0 to 32.

mask: Specifies the subnet mask of the summary route, in dotted decimal notation.

Usage guidelines

This command takes effect only when automatic route summarization is disabled.

Examples

# Configure a summary route on VLAN-interface 10.

<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip summary-address 10.0.0.0 255.255.255.0

Related commands

summary