rip mib-binding
Use rip mib-binding to bind a RIP process to MIB.
Use undo rip mib-binding to restore the default.
Syntax
rip mib-binding process-id
undo rip mib-binding
Default
MIB operation is bound to the RIP process with the smallest process ID.
Views
System view
Predefined user roles
network-admin
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Usage guidelines
If the specified process ID does not exist, the MIB binding configuration does not take effect.
Deleting a RIP process bound to MIB operation deletes the MIB binding configuration. After the RIP process is deleted, MIB operation is bound to the RIP process with the smallest process ID.
Examples
# Bind RIP process 100 to MIB.
<Sysname> system-view [Sysname] rip mib-binding 100