host-route
Use host-route to enable host route reception.
Use undo host-route to disable host route reception.
Syntax
host-route
undo host-route
Default
RIP receives host routes.
Views
RIP view
Predefined user roles
network-admin
Usage guidelines
A router might receive many host routes from the same subnet. These routes are not helpful for routing and occupy a large number of resources. To solve this problem, use the undo host-route command to disable RIP from receiving host routes.
This command takes effect only for RIPv2 routes.
Examples
# Disable RIP from receiving host routes.
<Sysname> system-view [Sysname] rip 1 [Sysname-rip-1] undo host-route