display rip non-stop-routing

Use display rip non-stop-routing to display the NSR status for a RIP process.

Syntax

display rip [ process-id ] non-stop-routing

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

process-id: Specifies a RIP process by its ID in the range of 1 to 65535. If you do not specify this argument, the command displays the NSR status for all RIP processes.

Examples

# Display the NSR status for RIP process 1.

<Sysname> display rip 1 non-stop-routing
RIP process: 1
 Nonstop Routing capability: Enabled
 Current NSR state         : Finish

Table 24: Command output

Field	Description
Nonstop Routing capability	Indicates whether NSR is enabled: Enabled or Disabled.
Current NSR state	NSR state: Initialization. Smooth—Upgrading data. Advertising—Advertising routes. Redistribution—Redistributing routes. Finish.

Field

Description

Nonstop Routing capability

Indicates whether NSR is enabled: Enabled or Disabled.

Current NSR state

NSR state:

Initialization.
Smooth—Upgrading data.
Advertising—Advertising routes.
Redistribution—Redistributing routes.
Finish.

prev	up	next
display rip neighbor	home	display rip route