ip route-static primary-path-detect bfd echo

Use ip route-static primary-path-detect bfd echo to enable BFD echo packet mode for static route FRR.

Use undo ip route-static primary-path-detect bfd to disable BFD echo packet mode for static route FRR.

Syntax

ip route-static primary-path-detect bfd echo

undo ip route-static primary-path-detect bfd

Default

BFD echo packet mode for static route FRR is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

This command enables static route FRR to use BFD echo packet mode for fast failure detection on the primary link.

Examples

# Enable BFD echo packet mode for static route FRR.

<Sysname> system-view
[Sysname] ip route-static 1.1.1.1 32 2.2.2.2 vlan-interface 10 backup-interface vlan-interface 11 backup-nexthop 3.3.3.3
[Sysname] ip route-static primary-path-detect bfd echo