flush route-attribute

Use flush route-attribute to enable the RIB to flush route attribute information to the FIB.

Use undo flush route-attribute to restore the default.

Syntax

flush route-attribute protocol

undo flush route-attribute protocol

Default

The RIB does not flush route attribute information to the FIB.

Views

RIB IPv4 address family view

Predefined user roles

network-admin

Parameters

Protocol: Specifies a routing protocol. Only BGP is supported in the current software version.

Examples

# Enable the RIB to flush route attribute information to the FIB.

<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv4
[Sysname-rib-ipv4] flush route-attribute bgp