Layer 2 multicast forwarding cannot function

Layer 2 multicast forwarding cannot function on the Layer 2 device.

To resolve the problem:

1. Use the display igmp-snooping command to display IGMP snooping status.

2. If IGMP snooping is not enabled, use the igmp-snooping command in system view to Enable the IGMP snooping feature. Then, use the igmp-snooping enable command in VLAN view or VSI view to enable IGMP snooping for the VLAN or VSI.

3. If IGMP snooping is enabled globally but not enabled for the VLAN or VSI, use the igmp-snooping enable command in VLAN view or VSI view to enable IGMP snooping for the VLAN or VSI.

4. If the problem persists, contact HPE Support.