To configure rules for a user role:
Step | Command | Remarks |
---|
1. Enter system view. | system-view | N/A |
2. Enter user role view. | role name role-name | N/A |
3. Configure rules for the user role. | Configure a command rule: rule number { deny | permit } command command-string Configure a feature rule:rule number { deny | permit } { execute | read | write } * feature [ feature-name ] Configure a feature group rule:rule number { deny | permit } { execute | read | write } * feature-group feature-group-name Configure an XML element rule:rule number { deny | permit } { execute | read | write } * xml-element [ xml-string ] Configure an OID rule:rule number { deny | permit } { execute | read | write } * oid oid-string
| By default, a user-defined user role does not have any rule or access to any command, XML element, or MIB node. Repeat this step to add a maximum of 256 rules to the user role. |
| | IMPORTANT: When you configure feature rules, you can specify only features available in the system. Enter feature names the same as the feature names are displayed, including the case. | |
|
|