lldp management-address-format string

Use lldp management-address-format string to configure the encoding format of the management address as string.

Use undo lldp management-address-format to restore the default.

Syntax

In Layer 2 Ethernet interface view or management Ethernet interface view:

lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format string

undo lldp [ agent { nearest-customer | nearest-nontpmr } ] management-address-format

In Layer 2 aggregate interface view:

lldp agent { nearest-customer | nearest-nontpmr } management-address-format string

undo lldp agent { nearest-customer | nearest-nontpmr } management-address-format

Default

The encoding format of the management address is numeric.

Views

Layer 2 aggregate interface view

Layer 2 Ethernet interface view

Management Ethernet interface view

Predefined user roles

network-admin

Parameters

agent: Specifies an LLDP agent type. If no agent type is specified in Ethernet interface view, the command configures the encoding format of the management address for nearest bridge agents.

nearest-bridge: Specifies nearest bridge agents.

nearest-customer: Specifies nearest customer bridge agents.

nearest-nontpmr: Specifies nearest non-TPMR bridge agents.

Usage guidelines

LLDP neighbors must use the same encoding format for the management address.

Examples

# Configure the encoding format of the management address as string for the nearest customer bridge agents on Ten-GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lldp agent nearest-customer management-address-format string