display vlan mapping

Use display vlan mapping to display VLAN mappings.

Syntax

display vlan mapping [ interface interface-type interface-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, the command displays VLAN mappings on all interfaces.

Examples

# Display VLAN mappings on all interfaces.

<Sysname> display vlan mapping
Interface Ten-GigabitEthernet1/0/1:
  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN
  10            N/A           120                      N/A

Interface Ten-GigabitEthernet1/0/2:
  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN
  4-4094        N/A           100                      N/A

Interface Ten-GigabitEthernet1/0/3:
  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN
  12            N/A           110                      12

Interface Ten-GigabitEthernet1/0/4:
  Outer VLAN    Inner VLAN    Translated Outer VLAN    Translated Inner VLAN
  11            30            130                      40

Table 58: Command output

Field	Description
Interface	Interface information.
Outer VLAN	Original outer VLAN. This field indicates the original VLAN when the Inner VLAN field displays N/A.
Inner VLAN	Original inner VLAN. This field displays N/A for the following VLAN mapping types: One-to-one VLAN mapping Many-to-one VLAN mapping One-to-two VLAN mapping
Translated Outer VLAN	Translated outer VLAN. This field indicates the translated VLAN when the Translated Inner VLAN field displays N/A.
Translated Inner VLAN	Translated inner VLAN. This field displays N/A for the following VLAN mapping types: One-to-one VLAN mapping Many-to-one VLAN mapping

Related commands

vlan mapping

prev	up	next
VLAN mapping commands	home	vlan mapping