qinq ethernet-type service-tag

Use qinq ethernet-type service-tag to configure the SVLAN TPID.

Use undo qinq ethernet-type service-tag to restore the default SVLAN TPID.

Syntax

qinq ethernet-type service-tag hex-value

undo qinq ethernet-type service-tag

Default

The SVLAN TPID is 0x8100.

Views

Ethernet interface view, aggregate interface view

Predefined user roles

network-admin

Parameters

hex-value: Sets a hexadecimal TPID value in the range of 0x0001 to 0xFFFF, excluding the reserved EtherType values listed in Table 57.

Usage guidelines

A service provider-side port uses the SVLAN TPID to replace the TPID in outgoing frames' SVLAN tags, in addition to matching incoming tagged frames.

Examples

# Set the SVLAN TPID to 0x9100 on Ten-GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qinq ethernet-type service-tag 9100