display qinq
Use display qinq to display the QinQ-enabled interfaces.
Syntax
display qinq [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays all QinQ-enabled interfaces.
Usage guidelines
If QinQ is not enabled on any interfaces, this command does not provide any output.
Examples
# Enable QinQ on Ten-GigabitEthernet 1/0/1. Then, verify that QinQ is enabled on the interface.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] qinq enable [Sysname-Ten-GigabitEthernet1/0/1] display qinq interface ten-gigabitethernet 1/0/1 Interface Ten-GigabitEthernet1/0/1
# Enable QinQ on Ten-GigabitEthernet 1/0/1 and Ten-GigabitEthernet 1/0/3. Then, verify that QinQ is enabled on the interfaces.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] qinq enable [Sysname-Ten-GigabitEthernet1/0/1] quit [Sysname] interface ten-gigabitethernet 1/0/3 [Sysname-Ten-GigabitEthernet1/0/3] qinq enable [Sysname-Ten-GigabitEthernet1/0/3] display qinq Interface Ten-GigabitEthernet1/0/1 Ten-GigabitEthernet1/0/3
Table 56: Command output
Field | Description |
|---|---|
Interface | Interface name. |
Ten-GigabitEthernet1/0/1 | QinQ-enabled interface. |
Related commands
qinq enable