mvrp enable

Use mvrp enable to enable MVRP on a port.

Use undo mvrp enable to restore the default.

Syntax

mvrp enable

undo mvrp enable

Default

MVRP is disabled on a port.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Usage guidelines

For MVRP to take effect on a port, make sure the following requirements are met:

• MVRP is enabled both globally and on the port.

• The port is in up state.

• The link type of the port is trunk.

• The port is not a member of an aggregation group.

Examples

# Enable MVRP on Ten-GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] mvrp global enable
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port link-type trunk
[Sysname-Ten-GigabitEthernet1/0/1] mvrp enable

Related commands

display mvrp running-status