stp tc-restriction

Use stp tc-restriction to enable TC-BPDU transmission restriction.

Use undo stp tc-restriction to disable TC-BPDU transmission restriction.

Syntax

stp tc-restriction

undo stp tc-restriction

Default

TC-BPDU transmission restriction is disabled.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Usage guidelines

When TC-BPDU transmission restriction is enabled on a port, the port does not send TC-BPDUs to the other ports. It also does not delete the MAC address entries.

When the command is configured in Layer 2 Ethernet interface view, it takes effect only on that interface.

When the command is configured in Layer 2 aggregate interface view, it takes effect only on the aggregate interface.

When the command is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group.

Examples

# Enable TC-BPDU transmission restriction on Ten-GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] stp tc-restriction