stp no-agreement-check

Use stp no-agreement-check to enable No Agreement Check on a port.

Use undo stp no-agreement-check to disable No Agreement Check on a port.

Syntax

stp no-agreement-check

undo stp no-agreement-check

Default

No Agreement Check is disabled.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Usage guidelines

This command takes effect only after you enable it on the root port.

When the command is configured in Layer 2 Ethernet interface view, it takes effect only on that interface.

When the command is configured in Layer 2 aggregate interface view, it takes effect only on the aggregate interface.

When the command is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group.

Examples

# Enable No Agreement Check on Ten-GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] stp no-agreement-check