stp config-digest-snooping

Use stp config-digest-snooping to enable Digest Snooping.

Use undo stp config-digest-snooping to disable Digest Snooping.

Syntax

stp config-digest-snooping

undo stp config-digest-snooping

Default

Digest Snooping is disabled.

Views

Layer 2 Ethernet interface view, Layer 2 aggregate interface view

Predefined user roles

network-admin

Usage guidelines

Enable this feature both globally and on ports connected to other vendors' devices. To minimize impact, enable the feature on all associated ports before you enable it globally.

When the command is configured in Layer 2 Ethernet interface view, it takes effect only on that interface.

When the command is configured in Layer 2 aggregate interface view, it takes effect only on the aggregate interface.

When the command is configured on a member port in an aggregation group, it takes effect only after the port leaves the aggregation group.

Examples

# Enable Digest Snooping on Ten-GigabitEthernet 1/0/1 and then globally.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] stp config-digest-snooping
[Sysname-Ten-GigabitEthernet1/0/1] quit
[Sysname] stp global config-digest-snooping

Related commands

display stp

stp global config-digest-snooping