region-name

Use region-name to configure the MST region name.

Use undo region-name to restore the default MST region name.

Syntax

region-name name

undo region-name

Default

The MST region name of a device is its MAC address.

Views

MST region view

Predefined user roles

network-admin

Parameters

name: Specifies the MST region name, a string of 1 to 32 characters.

Usage guidelines

The MST region name, the VLAN-to-instance mapping table, and the MSTP revision level of a device determine the device's MST region.

After configuring this command, run the active region-configuration command to activate the configured MST region name.

Examples

# Set the MST region name of the device to hello.

<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello

Related commands

active region-configuration

check region-configuration

display stp region-configuration

instance

revision-level

vlan-mapping modulo