active region-configuration

Use active region-configuration to activate your MST region configuration.

Syntax

active region-configuration

Views

MST region view

Predefined user roles

network-admin

Usage guidelines

When you configure MST region parameters, MSTP launches a new spanning tree calculation process that might cause network topology instability. This is most likely to occur when you configure the VLAN-to-instance mapping table. The launch occurs after you execute the active region-configuration command or the stp global enable command.

As a best practice, use the check region-configuration command to determine whether the MST region configurations to be activated are correct. Run this command only when they are correct.

Examples

# Map VLAN 2 to MSTI 1 and manually activate the MST region configuration.

<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] instance 1 vlan 2
[Sysname-mst-region] active region-configuration

Related commands

check region-configuration

instance

region-name

revision-level

stp global enable

vlan-mapping modulo