display port-isolate group
Use display port-isolate group to display port isolation group information.
Syntax
display port-isolate group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-number: Specifies an isolation group by its number in the range of 1 to 8.
Examples
# Display all isolation groups.
<Sysname> display port-isolate group
Port isolation group information:
Group ID: 2
Group members:
Ten-GigabitEthernet1/0/1
Group ID: 5
Group members:
Ten-GigabitEthernet1/0/2
Ten-GigabitEthernet1/0/4
# Display information about isolation group 2.
<Sysname> display port-isolate group 2
Port isolation group information:
Group ID: 2
Group members:
Ten-GigabitEthernet1/0/1
Table 26: Command output
Field | Description |
|---|---|
Group ID | Isolation group number. |
Group members | Isolated ports in the isolation group. If the isolation group contains no isolated ports, this field displays No ports. |
Related commands
port-isolate enable