link-aggregation global load-sharing seed

Use link-aggregation global load-sharing seed to configure the per-flow load sharing algorithm seed for Ethernet link aggregation.

Use undo link-aggregation global load-sharing seed to restore the default.

Syntax

link-aggregation global load-sharing seed seed-number

undo link-aggregation global load-sharing seed

Default

Algorithm seed 0 is used.

Views

System view

Predefined user roles

network-admin

Parameters

seed seed-number: Specifies a seed in the range of 1 to 7FFFFFFF.

Usage guidelines

If you execute this command multiple times, the most recent configuration takes effect.

You can configure only the algorithm or the algorithm seed, or both. You can combine an algorithm with different algorithm seeds to obtain different effects.

Examples

# Specify 1023 (3FF in hexadecimal format) as the per-flow load sharing algorithm seed.

<Sysname> system-view
[Sysname] link-aggregation global load-sharing seed 3FF

Related commands

display link-aggregation load-sharing mode

link-aggregation global load-sharing algorithm

link-aggregation global load-sharing mode

link-aggregation load-sharing mode