mac-address mac-roaming enable

Use mac-address mac-roaming enable to enable MAC address synchronization.

Use undo mac-address mac-roaming enable to restore the default.

Syntax

mac-address mac-roaming enable

undo mac-address mac-roaming enable

Default

MAC address synchronization is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

If ports on different IRF member devices are Selected ports from the same aggregation group, MAC address entries are synchronized among these IRF member devices. They are synchronized whether or not MAC address synchronization is enabled for the IRF fabric. For more information about aggregation groups, see Layer 2—LAN Switching Configuration Guide.

The MAC address table size might vary by IRF member device. With MAC address synchronization enabled, MAC address entries exceeding the table size of an IRF member device cannot be synchronized to the MAC address table.

Examples

# Enable MAC address synchronization.

<Sysname> system-view
[Sysname] mac-address mac-roaming enable